Whale Microswitch For Elegance Taps
The Whale Microswitch For Elegance Taps is an ideal replacement for when servicing your taps. The replacement Whale microswitch is useful if you find your tap control unit is no longer turning your pump on, or in the situation where you may wish to change from a pressure water system to a switched water system. The microswitch is compatible for use with Elegance single and mixer taps. To view our full selection of Whale and fresh water accessories, please see our link below.
Whales recommendations for fitting – Microswitches can be removed and replaced as follows:
- Turn off power supply.
- Turn tap / faucet to ‘off’ position (using hot and cold control knobs).
- Remove the crimp terminals.
- Hold the sides of the micro-switch clip with your thumb and finger and gently pull off the clip.
- The microswitch should slide off the two retaining pins. Be careful not to break the pins off.
- Single two pin microswitch
- Ideal for servicing or as a replacement
- Simple to install
- Compatible with Whale Elegance single and mixer taps
- product reference: AK3033